1. Tape should be stored in the warehouse to avoid direct sunlight and rain; Do not touch organic solvents such as acid, alkali, or oil. Keep it clean and dry, and keep it 1 meter away from the detection device. The room temperature should be between -15 ℃ and 40 ℃.

2. The diameter of the conveyor roller and the minimum pulley diameter of the conveyor belt should comply with relevant regulations.

3. It is not allowed to use polyimide tapes of different varieties, specifications, strengths, and layers together.

4. The type and specifications of anti-static tape should be selected reasonably based on application needs and specific conditions.

5. When loading and unloading the conveyor belt, it is best to use a crane and a rigging with a crossbeam to lift it steadily to avoid damaging the edge of the belt. Do not load and unload recklessly, which may cause loose coils or sleeves.

6. The best choice for conveyor belt joints is to use hot vulcanized adhesive to improve reliability and maintain high useful strength.

7. The golden finger tape should be placed in rolls without folding, and should be flipped once a season if stored for too long.

8. Cleanliness is a basic condition for the good operation of gold finger tape. Foreign substances can affect the eccentricity, tension difference, and even breakage of the tape.

9. When the conveyor is equipped with baffles and cleaning devices, wear on the polyimide tape should be avoided.

10. Do not let the polyimide tape snake or crawl, keep the dragging roller and vertical roller sensitive, and the tension should be moderate.

11. When early signs of damage are found in the use of polyimide tape, the cause should be promptly identified and repaired to avoid adverse consequences.