In daily life, we also use a lot of adhesive tape, which can be torn off over time and leave stubborn tape marks. No matter how long the tape is printed or how large the area is, drop some nail wash water for girls to clean nail polish, soak it for a while, and then wipe it with a paper towel to ensure that the surface of the item is as clean as new. But there is one issue, due to the strong corrosiveness of nail polish remover, it cannot be used on surfaces that are afraid of corrosion, such as painted furniture, laptop casings, etc. So, although using nail polish remover to remove tape marks may be effective, it is important to pay attention to protecting items with traces from corrosion.

Offset printing exists on the surface of objects that have a long time, a large area, are difficult to clean, and are not easily corroded. Heat the offset printing hair dryer to the maximum heat, blow it against the tape mark for a while, let it slowly soften, and then use a harder eraser or soft cloth to wipe it off. Suitable for items with small tape marks and long lasting offset printing, but the items must have sufficient heat resistance. Dip some medical alcohol onto the surface of the imprint, soak it for a while, and then wipe it off with a soft cloth or tissue. Of course, items with tape marks must not be afraid of alcohol corrosion. Similarly, if you have expired perfume or astringent makeup water, it can also be used to replace alcohol, because there is a certain alcohol content in it (reference: what's the use of expired or inapplicable skin care products and cosmetics), and these two can be applied to any item, after all, the alcohol content in it is not too much.